dmesg - Intel Core 2 Duo E7300

Return To Intel Core 2 Duo E7300 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-28-generic (buildd@komainu) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #38-Ubuntu SMP Fri Dec 12 17:37:40 UTC 2014 (Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
BIOS-e820: [mem 0x00000000cff90000-0x00000000cff9dfff] ACPI data
BIOS-e820: [mem 0x00000000cff9e000-0x00000000cffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: MSI MS-7519/P45 Neo-F (MS-7519), BIOS V1.12 01/18/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 100000000 mask FE0000000 write-back
  2 base 120000000 mask FF0000000 write-back
  3 base 0D0000000 mask FF0000000 uncachable
  4 base 0E0000000 mask FE0000000 uncachable
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 512MB, type WB
reg 2, base: 4608MB, range: 256MB, type WB
reg 3, base: 3328MB, range: 256MB, type UC
reg 4, base: 3584MB, range: 512MB, type UC
total RAM covered: 4096M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64K 	num_reg: 5  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4608MB, range: 256MB, type WB
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
 [mem 0x12fe00000-0x12fffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
 [mem 0x12c000000-0x12fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x12bffffff]
 [mem 0x100000000-0x12bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcff8ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xcfdfffff] page 2M
 [mem 0xcfe00000-0xcff8ffff] page 4k
RAMDISK: [mem 0x357f2000-0x36bf0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F9C70 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000CFF90000 00003C (v01 7519MS A7519200 20100118 MSFT 00000097)
ACPI: FACP 0x00000000CFF90200 000084 (v01 7519MS A7519200 20100118 MSFT 00000097)
ACPI: DSDT 0x00000000CFF90440 0064A5 (v01 A7519  A7519200 00000200 INTL 20051117)
ACPI: FACS 0x00000000CFF9E000 000040
ACPI: APIC 0x00000000CFF90390 00006C (v01 7519MS A7519200 20100118 MSFT 00000097)
ACPI: MCFG 0x00000000CFF90400 00003C (v01 7519MS OEMMCFG  20100118 MSFT 00000097)
ACPI: OEMB 0x00000000CFF9E040 000072 (v01 7519MS A7519200 20100118 MSFT 00000097)
ACPI: HPET 0x00000000CFF98440 000038 (v01 7519MS OEMHPET  20100118 MSFT 00000097)
ACPI: SSDT 0x00000000CFF9E640 000A7C (v01 DpgPmm CpuPm    00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
  NODE_DATA [mem 0x12fff7000-0x12fffbfff]
 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0xcff8ffff]
  node   0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048365
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13247 pages used for memmap
  DMA32 zone: 847760 pages, LIFO batch:31
  Normal zone: 3072 pages used for memmap
  Normal zone: 196608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83328 r8192 d23168 u524288
pcpu-alloc: s83328 r8192 d23168 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031961
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4024356K/4193460K available (7740K kernel code, 1200K rwdata, 3608K rodata, 1356K init, 1308K bss, 169104K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:712 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3411.523 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6823.04 BogoMIPS (lpj=13646092)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000)
ftrace: allocating 29302 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E7300  @ 2.66GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (13646.09 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 14:06:19, date: 01/14/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88012B00F800 0002B9 (v01 DpgPmm P001Ist  00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88012B00FC00 0002B9 (v01 DpgPmm P002Ist  00000012 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0xbc00-0xbc1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0xb800-0xb81f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfe9ffc00-0xfe9fffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xb480-0xb49f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xb080-0xb09f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfe9ff800-0xfe9ffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xb000-0xb007]
pci 0000:00:1f.2: reg 0x14: [io  0xac00-0xac03]
pci 0000:00:1f.2: reg 0x18: [io  0xa880-0xa887]
pci 0000:00:1f.2: reg 0x1c: [io  0xa800-0xa803]
pci 0000:00:1f.2: reg 0x20: [io  0xa480-0xa49f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfe9ff000-0xfe9ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe9fec00-0xfe9fecff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
pci 0000:01:00.0: [1002:944c] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfeaf0000-0xfeafffff 64bit]
pci 0000:01:00.0: reg 0x20: [io  0xc000-0xc0ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfeaec000-0xfeaeffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [197b:2368] type 00 class 0x010185
pci 0000:02:00.0: reg 0x10: [io  0xdc00-0xdc07]
pci 0000:02:00.0: reg 0x14: [io  0xd880-0xd883]
pci 0000:02:00.0: reg 0x18: [io  0xd800-0xd807]
pci 0000:02:00.0: reg 0x1c: [io  0xd480-0xd483]
pci 0000:02:00.0: reg 0x20: [io  0xd400-0xd40f]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xe800-0xe8ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0xfebf0000-0xfebfffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.5:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:04: [io  0x04c0-0x04ff] has been reserved
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x0800-0x087f] could not be reserved
system 00:04: [io  0x0480-0x04bf] has been reserved
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io  0x0a00-0x0adf] has been reserved
system 00:07: [io  0x0ae0-0x0aef] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:09: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0xf0400000-0xf05fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfea00000-0xfea1ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf05fffff]
pci 0000:00:1c.1:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.5:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf05fffff]
pci_bus 0000:03: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20476K (ffff8800357f2000 - ffff880036bf1000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbf90000-0xcff90000] (64MB) mapped at [ffff8800cbf90000-ffff8800cff8ffff]
microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c
microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1421244379.388:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 7900
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: enabling device (0105 -> 0107)
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: enabling device (0104 -> 0107)
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9ffc00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-28-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9ff800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-28-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-28-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: af30e7f37b41301c96f985f4789da5f4373e9e92'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 15:568:131
acpi device:06: hash matches
acpi PNP0C02:03: hash matches
rtc_cmos 00:01: setting system clock to 2015-01-14 14:06:20 UTC (1421244380)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1356K (ffffffff81d2e000 - ffffffff81e81000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 440K (ffff880001792000 - ffff880001800000)
Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
systemd-udevd[102]: starting version 208
random: systemd-udevd urandom read with 2 bits of entropy available
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
scsi0 : pata_jmicron
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 44 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168c/8111c at 0xffffc90010736000, 00:21:85:5e:69:65, XID 1c4000c0 IRQ 44
r8169 0000:04:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff100 irq 45
ata4: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff180 irq 45
ata5: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff200 irq 45
ata6: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff280 irq 45
ata7: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff300 irq 45
ata8: SATA max UDMA/133 abar m2048@0xfe9ff000 port 0xfe9ff380 irq 45
raid6: sse2x1    5429 MB/s
raid6: sse2x2    5909 MB/s
raid6: sse2x4    9961 MB/s
raid6: using algorithm sse2x4 (9961 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
ata1.00: ATAPI: Optiarc DVD RW AD-5200A, 1.03, max UDMA/66
ata1.00: configured for UDMA/66
scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-5200A  1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
   prefetch64-sse: 13927.000 MB/sec
   generic_sse: 12318.000 MB/sec
xor: using function: prefetch64-sse (13927.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD30EZRX-00M 0A80 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: unknown partition table
sd 2:0:0:0: [sda] Attached SCSI disk
usb 5-1: new full-speed USB device number 2 using uhci_hcd
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD30EZRX-00M 0A80 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: unknown partition table
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 5-1: New USB device found, idVendor=046d, idProduct=c52b
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Receiver
usb 5-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-1/input2
tsc: Refined TSC clocksource calibration: 3411.449 MHz
input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1a.2-1:2
input: Logitech Unifying Device. Wireless PID:101d as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input6
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101d] on usb-0000:00:1a.2-1:3
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
ata5.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      ST3160811AS      E    PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-9: M4-CT064M4SSD2, 040H, max UDMA/100
ata7.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/100
scsi 6:0:0:0: Direct-Access     ATA      M4-CT064M4SSD2   040H PQ: 0 ANSI: 5
sd 6:0:0:0: [sdd] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1 sdd2 sdd3
sd 6:0:0:0: [sdd] Attached SCSI disk
Switched to clocksource tsc
ata8: SATA link down (SStatus 0 SControl 300)
md: bind
md: bind
md/raid:md127: device sda operational as raid disk 0
md/raid:md127: device sdb operational as raid disk 1
md/raid:md127: allocated 0kB
md/raid:md127: raid level 5 active with 2 out of 2 devices, algorithm 2
RAID conf printout:
 --- level:5 rd:2 wd:2
 disk 0, o:1, dev:sda
 disk 1, o:1, dev:sdb
created bitmap (22 pages) for device md127
md127: bitmap initialized from disk: read 2 pages, set 0 of 44711 bits
md127: detected capacity change from 0 to 3000458280960
 md127: unknown partition table
random: nonblocking pool is initialized
floppy0: no floppy controllers found
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (216) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (232) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 4097020k swap on /dev/sdd3.  Priority:-1 extents:1 across:4097020k SSFS
EXT4-fs (sdd1): re-mounted. Opts: discard,errors=remount-ro
systemd-udevd[377]: starting version 208
EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: discard
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
lp0: using parport0 (interrupt-driven).
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
audit: type=1400 audit(1421244389.281:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=545 comm="apparmor_parser"
audit: type=1400 audit(1421244389.281:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=545 comm="apparmor_parser"
audit: type=1400 audit(1421244389.281:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=545 comm="apparmor_parser"
audit: type=1400 audit(1421244389.285:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=550 comm="apparmor_parser"
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit: type=1400 audit(1421244389.465:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1421244389.465:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1421244389.465:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=614 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (618) killed by HUP signal
init: cups main process ended, respawning
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    dig-out=0x1e/0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Front Mic=0x19
sound hdaudioC0D0:      Rear Mic=0x18
sound hdaudioC0D0:      Line=0x1a
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV770 0x1002:0x944C 0x1787:0x2273).
[drm] register mmio base: 0xFEAF0000
[drm] register mmio size: 65536
ATOM BIOS: RV770
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone  kernel: Available graphics memory: 2023574 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading RV770 Microcode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[drm] Internal thermal controller with fan control
== power state 0 ==
	ui class: none
	internal class: boot 
	caps: video 
	uvd    vclk: 0 dclk: 0
		power level 0    sclk: 57500 mclk: 90000 vddc: 1123
		power level 1    sclk: 57500 mclk: 90000 vddc: 1123
		power level 2    sclk: 57500 mclk: 90000 vddc: 1123
	status: c r b 
== power state 1 ==
	ui class: performance
	internal class: none
	caps: single_disp video 
	uvd    vclk: 0 dclk: 0
		power level 0    sclk: 50000 mclk: 75000 vddc: 1046
		power level 1    sclk: 50000 mclk: 75000 vddc: 1046
		power level 2    sclk: 57500 mclk: 90000 vddc: 1123
	status: 
== power state 2 ==
	ui class: none
	internal class: uvd 
	caps: video 
	uvd    vclk: 53300 dclk: 40000
		power level 0    sclk: 50000 mclk: 75000 vddc: 1046
		power level 1    sclk: 50000 mclk: 75000 vddc: 1046
		power level 2    sclk: 50000 mclk: 75000 vddc: 1046
	status: 
== power state 3 ==
	ui class: performance
	internal class: none
	caps: video 
	uvd    vclk: 0 dclk: 0
		power level 0    sclk: 57500 mclk: 90000 vddc: 1123
		power level 1    sclk: 57500 mclk: 90000 vddc: 1123
		power level 2    sclk: 57500 mclk: 90000 vddc: 1123
	status: 
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800bbeacc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800bbeacc0c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 48 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm]   VGA-1
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I-1
[drm]   HPD2
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Connector 3:
[drm]   DIN-1
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
switching from power state:
	ui class: none
	internal class: boot 
	caps: video 
	uvd    vclk: 0 dclk: 0
		power level 0    sclk: 57500 mclk: 90000 vddc: 1123
		power level 1    sclk: 57500 mclk: 90000 vddc: 1123
		power level 2    sclk: 57500 mclk: 90000 vddc: 1123
	status: c b 
switching to power state:
	ui class: performance
	internal class: none
	caps: single_disp video 
	uvd    vclk: 0 dclk: 0
		power level 0    sclk: 50000 mclk: 75000 vddc: 1046
		power level 1    sclk: 50000 mclk: 75000 vddc: 1046
		power level 2    sclk: 57500 mclk: 90000 vddc: 1123
	status: r 
gpio_ich: GPIO from 195 to 255 on gpio_ich
[drm] fb mappable at 0xD0241000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
init: failsafe main process (754) killed by TERM signal
init: samba-ad-dc main process (832) terminated with status 1
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
audit: type=1400 audit(1421244390.257:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=956 comm="apparmor_parser"
audit: type=1400 audit(1421244390.257:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=956 comm="apparmor_parser"
audit: type=1400 audit(1421244390.269:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=956 comm="apparmor_parser"
systemd-logind[948]: New seat seat0.
systemd-logind[948]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[948]: Watching system buttons on /dev/input/event0 (Power Button)
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: autofs main process (1245) terminated with status 127
init: autofs main process ended, respawning
switching from power state:
	ui class: performance
	internal class: none
	caps: single_disp video 
	uvd    vclk: 0 dclk: 0
		power level 0    sclk: 50000 mclk: 75000 vddc: 1046
		power level 1    sclk: 50000 mclk: 75000 vddc: 1046
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
		power level 2    sclk: 57500 mclk: 90000 vddc: 1123
	status: c 
switching to power state:
	ui class: performance
	internal class: none
	caps: video 
	uvd    vclk: 0 dclk: 0
		power level 0    sclk: 57500 mclk: 90000 vddc: 1123
		power level 1    sclk: 57500 mclk: 90000 vddc: 1123
		power level 2    sclk: 57500 mclk: 90000 vddc: 1123
	status: r 
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1773) killed by TERM signal
systemd-logind[948]: Failed to start unit user@110.service: Unknown unit: user@110.service
systemd-logind[948]: Failed to start user service: Unknown unit: user@110.service
systemd-logind[948]: New session c1 of user lightdm.
systemd-logind[948]: Linked /tmp/.X11-unix/X0 to /run/user/110/X11-display.
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
floppy0: no floppy controllers found
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
r8169 0000:04:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
systemd-logind[948]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[948]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[948]: New session c2 of user renaud.
systemd-logind[948]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
systemd-timedated[3756]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
audit_printk_skb: 72 callbacks suppressed
audit: type=1400 audit(1421244419.579:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3781 comm="apparmor_parser"
audit: type=1400 audit(1421244419.579:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3781 comm="apparmor_parser"
audit: type=1400 audit(1421244419.599:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=3781 comm="apparmor_parser"

Return To Intel Core 2 Duo E7300 System Information